slot width
英 [slɒt wɪdθ]
美 [slɑːt wɪdθ]
网络 缝隙宽度; 槽宽; 齿缝宽度
双语例句
- The arm width and the slot width influence the center frequency as well as the bandwidth.
臂宽和缝宽在影响中心频率的同时也影响带宽； - Some parameters affecting the supersonic flowfield, including the total pressure ratio of jet to freestream, slot width of injection, and the angle of injection were studied in more detail.
探讨了射流/主流总压比、射流宽度、以及射流与来流夹角对射流穿透深度、分离距离等影响，揭示了二次射流推力矢量控制干扰流场的控制机理。 - Determination of Slot Width in A Slotted Pipe for Directional-split Blasting
切缝药包定向断裂爆破切缝管切缝宽度的确定 - If other factors remained unchanged, the hole diameter and the slot width increased with decreasing laser energy intensity and increasing nozzle diameter, the machining surface is not plan and the machining depth are slow.
当其它试验条件不变时，喷嘴直径越大，水导引激光能量密度越小，加工孔径和槽宽越大，加工深度越浅，加工的表面质量越差。 - In this paper, the method to calculate the pole arc coefficient is got. ( 3) The reduction method of cogging torque by different slot width pairing is studied.
本文分析了平行充磁永磁直流电机极弧系数对齿槽转矩的影响，得到了极弧系数的确定方法。（3）分析了不等槽口宽配合削弱齿槽转矩的方法。 - Therefore, it is necessary to raise the gas volume rate while keeping the gas slot width and the casting speed at appropriate levels so as to improve slab quality.
为此，连铸过程中必须采用合适的气缝宽度和拉坯速度，尽可能地增大气体流量，以提高连铸坯质量。 - An Experimental Study about Relationship between Slot Width and Static Pressure Distribution on Bridge Deck Surface
桥面槽缝对桥梁断面静态压力分布影响的实验研究 - Analyzing the degree of the parameters influencing on heat transfer performance of heat pipe, they are wick diameter, groove number, the slot width and the vapor core diameter.
分析得到了各参数对热管传热性能影响程度，由大到小的顺序为槽道直径、槽道数目、窄缝宽度和蒸汽腔直径。 - The experimental results show that the resonant frequency of FSS increases with the slot width, and the transmission ratio and resonant bandwidth is becoming greater.
实验测试的结果表明，缝隙宽度变大时，谐振频率升高，同时，FSS平板的透波率和谐振带宽变大。 - This thesis analyzes the crack slot parameter ( width-deep ratio), Carries on the detailed analysis from the slot theory width and the actual construction width, to obtain the better slot parameter ( width-deep ratio).
本文对裂缝开槽的参数（宽深比）进行了分析，从开槽的理论宽度和实际施工的宽度进行详细的分析，得出了较好的开槽的参数（宽深比）。理论计算得理论图。